The Peptide Report dosage guide

IGF-1 LR3 Dosage Guide and Calculator

IGF-1 LR3 research vial
Example vial shown

IGF-1 LR3 dosage chart and reported amounts

The published recommendation starts at 20 to 40 mcg a day for a novice, split across two or three administrations, rising by 10 to 20 mcg a week to a ceiling of 80 to 100 mcg a day. With a 1 mg vial mixed with 2 mL of water, 50 mcg is 10 units on a U-100 syringe. The cycle is 4 to 6 weeks on with 2 to 4 weeks off.

The amounts in this chart come from online communities. The vial label shows the total peptide in milligrams (mg). The Amount column shows a portion of that total in micrograms (mcg). The syringe mark shows how much liquid corresponds to that amount.

Syringe marks below are based on a 1 mg vial with 2 mL of water added. Change vial size or water in the calculator

ReportedAmountVolumeSyringe mark (U-100)Draws per vial
1 mg
mg
mL
Draw to this line
units on a U-100 syringe

Show me the math
1

Convert your vial to mcg, because 1 mg is the same as 1,000 mcg.

2

Divide by your water to see how much is in 1 mL.

3

Find what one unit holds. A U-100 syringe has 100 units in 1 mL.

4

Divide your amount by what one unit holds.

How people take IGF-1 LR3

Novice start
20 to 40 mcg a day, split into two or three administrations rather than one.
How to move up
Once you know how you tolerate it, increase by 10 to 20 mcg a week, up to a ceiling of 80 to 100 mcg a day. The experienced schedule starts higher, 40 to 60 mcg, rising 20 to 30 mcg weekly to 100 to 120 mcg.
The cycle
4 to 6 weeks on, then 2 to 4 weeks off. The break is there to stop receptors desensitising.
A conflict in the source
Worth flagging. The article gives the general cycle-on period as 4 to 6 weeks and then describes an experienced cycle of 8 to 12 weeks. Those are not reconciled anywhere in it, so pick deliberately rather than assuming the longer one is simply the advanced version.
Monitoring
The article advises blood work: liver enzymes, blood sugar and IGF-1 levels, under medical supervision. That is unusual advice for this space and it is there for a reason.

How to mix a IGF-1 LR3 vial

Follow one step at a time. The steps use the water amount from your calculator.

  1. Step 1: Check the label

    Find the mg printed on your vial and enter it in the calculator. Let a frozen vial reach room temperature first.

  2. Step 2: Wipe both stoppers

    Clean the top of the peptide vial and the water vial with an alcohol swab. Let them dry.

  3. Step 3: Measure 2 mL

    Draw bacteriostatic water with a sterile syringe.

  4. Step 4: Add it slowly

    Let the water run down the inside wall of the vial. This helps prevent foaming.

  5. Step 5: Swirl gently

    Roll the vial until the powder fully dissolves. Do not shake it hard.

  6. Step 6: Label and chill

    Write today's date on the vial and refrigerate it at 2–8 °C (35.6–46.4 °F), away from light.

What you need

A vial of powder, a vial of water, a 3 mL syringe, an insulin syringe, and alcohol swabs
  • Peptide vial
  • Bacteriostatic water
  • 3 mL syringe for adding water
  • U-100 insulin syringe for measuring
  • Alcohol swabs

Plan your supplies

Pick how many weeks you will run it and how many shots you take each week. The list below shows everything you need.

12weeks
Shots per week

Storage and warning signs

Powder vials

Store at −20 °C (−4 °F) in dry, dark conditions and keep them in the original packaging.

Mixed vials

Keep them refrigerated and away from light. How long a mixed vial lasts depends on the product, so check its stability data.

Stop using a vial if

  • The liquid turns cloudy.
  • You can see particles.
  • The seal is damaged.
  • You do not know its storage history.

Product info and what IGF-1 LR3 is

IGF-1 LR3 is a modified version of insulin-like growth factor 1. The LR3 part means it is lengthened and altered so it binds far less to the binding proteins that would normally mop it up, which makes it last much longer in circulation.

That is the whole point and also the whole problem. A growth factor that stays active longer does more, and the things it does are not confined to muscle.

Type
Modified IGF-1 analog
What LR3 means
Lengthened and altered to avoid binding proteins
Common research vial
1 mg
Common water amount
2 mL, which makes 0.5 mg per mL
Novice start
20 to 40 mcg a day
Ceiling
80 to 100 mcg a day
Cycle
4 to 6 weeks on, 2 to 4 weeks off

What people use IGF-1 LR3 for

Muscle growth

The main reason people use it, through the PI3K and Akt pathway, glucose transport and protein synthesis.

Recovery

The secondary claim, and the one with less behind it.

What to actually watch

Blood sugar. Hypoglycemia is on the article's own list of more serious effects, and it is the thing that goes wrong fastest.

How fast people notice it

The cycle is 4 to 6 weeks, which is the timescale the figures are built around.

What the research shows on IGF-1 LR3

What the modification does

Standard IGF-1 is largely bound up by binding proteins in circulation. The LR3 modification reduces that binding, so more stays active and for longer. That is the entire design rationale.

Mechanism

The article describes the PI3K and Akt pathway, glucose transport and protein synthesis, which is the standard account of how IGF-1 signalling drives growth.

How thin the citations are

Worth saying plainly. The article refers to extensive research by the National Institutes of Health and to a study in the Journal of Strength and Conditioning Research, but names no study, author or year for either. There is no citation on this page to go and check.

Why the split dosing

Dividing the daily amount into two or three administrations is standard practice with this compound, though nothing published establishes that it is better than one.

Why blood sugar matters

IGF-1 has insulin-like activity, which is where the name comes from. That is the mechanism behind the hypoglycemia risk, not an unrelated side effect.

Where to buy IGF-1 LR3

Laboratory research supplier

BioEdge Research Labs

Quality varies a lot between sellers. I have been around research peptides for 10 years, and BioEdge is the supplier I send my readers to. Here is why.

The Peptide Report has a business relationship with BioEdge Research Labs. BioEdge sells this product for laboratory research only. BioEdge shipping policy

Want to learn to do the math yourself? Open the practice tools ▾

Learn to work out any vial

Pick a tool and try it. Each one uses the numbers from your calculator.

Now try one yourself

Use the same four steps. Once you can solve these, you can work out the units for any vial you ever pick up.

Your score: 0 correct.

units

Learn to read the syringe

Each line on the syringe is a unit of liquid. A unit measures volume, so the amount of peptide in it depends on your mix.

Tap the syringe or move the slider. The numbers use the vial you entered above. Read the line at the top edge of the plunger.

10units
0.10mL
mcg in your mix

See what water changes

More water makes the mix weaker, so the same amount takes up more units. The amount of peptide in the vial stays the same.

A draw under 5 units is harder to read accurately. Tap a row to use that water amount.

IGF-1 LR3 questions and answers

What is the IGF-1 LR3 dosage?

A novice starts at 20 to 40 mcg a day split into two or three administrations, rising 10 to 20 mcg weekly to a ceiling of 80 to 100 mcg. The experienced schedule starts at 40 to 60 mcg rising to 100 to 120 mcg.

How many units is 50 mcg of IGF-1 LR3?

With a 1 mg vial and 2 mL of water, 50 mcg is 10 units on a U-100 syringe and 20 mcg is 4 units. Use the calculator if your mix is different.

How long is a cycle?

4 to 6 weeks on, 2 to 4 weeks off. Note that the source also describes an 8 to 12 week experienced cycle without reconciling the two.

Why split the daily amount?

Two or three administrations a day is the standard practice, though nothing published establishes it is better than one.

What should I monitor?

The source advises liver enzymes, blood sugar and IGF-1 levels, under medical supervision.

Is IGF-1 LR3 the same as MGF?

No. MGF is a splice variant of IGF-1, a short piece of it. They are different molecules and amounts do not transfer.

Why don't my units match another chart?

Most charts assume one vial size and one water amount. If your mix is different, every unit number changes, so run your own numbers.

This guide is for educational purposes only and is not medical advice. For research use only. Not for human or animal use. Reported amounts come from online sources and are not clinically validated. Consult a qualified healthcare professional for medical decisions.

Instant e-Book Download

Get Your Free Copy of The Ultimate Peptide Blueprint
Exact stacks, dosages & cutting-edge protocols to cut fat, build muscle, and keep results-no fluff.