The Peptide Report dosage guide

TB-500 Dosage Guide and Calculator

TB-500 research vial
Example vial shown

TB-500 dosage chart and reported amounts

Most people use 5 mg of TB-500 twice a week. With a 10 mg vial mixed with 1 mL of water, that is 50 units on a U-100 syringe. Most people run it for 12 weeks alongside BPC-157, once or twice a year.

The amounts in this chart come from online communities. The vial label shows the total peptide in milligrams (mg). The Amount column shows a portion of that total in micrograms (mcg). The syringe mark shows how much liquid corresponds to that amount.

Syringe marks below are based on a 10 mg vial with 1 mL of water added. Change vial size or water in the calculator

ReportedAmountVolumeSyringe mark (U-100)Draws per vial
10 mg
mg
mL
Draw to this line
units on a U-100 syringe

Show me the math
1

Convert your vial to mcg, because 1 mg is the same as 1,000 mcg.

2

Divide by your water to see how much is in 1 mL.

3

Find what one unit holds. A U-100 syringe has 100 units in 1 mL.

4

Divide your amount by what one unit holds.

How people take TB-500

How often

Most people inject it twice a week, such as Monday and Thursday. Spacing the shots three or four days apart keeps the schedule easy to follow.

Where to inject

Most people inject under the skin of the belly. TB-500 travels through the whole body, so the shot does not need to go near the injury.

With BPC-157

Most people run TB-500 together with BPC-157. BPC-157 is taken every day, and TB-500 is added twice a week.

How long

Most people run it for 12 weeks, once or twice a year as needed.

How to mix a TB-500 vial

Follow one step at a time. The steps use the water amount from your calculator.

  1. Step 1: Check the label

    Find the mg printed on your vial and enter it in the calculator. Let a frozen vial reach room temperature first.

  2. Step 2: Wipe both stoppers

    Clean the top of the peptide vial and the water vial with an alcohol swab. Let them dry.

  3. Step 3: Measure 1 mL

    Draw bacteriostatic water with a sterile syringe.

  4. Step 4: Add it slowly

    Let the water run down the inside wall of the vial. This helps prevent foaming.

  5. Step 5: Swirl gently

    Roll the vial until the powder fully dissolves. Do not shake it hard.

  6. Step 6: Label and chill

    Write today's date on the vial and refrigerate it at 2–8 °C (35.6–46.4 °F), away from light.

What you need

A vial of powder, a vial of water, a 3 mL syringe, an insulin syringe, and alcohol swabs
  • Peptide vial
  • Bacteriostatic water
  • 3 mL syringe for adding water
  • U-100 insulin syringe for measuring
  • Alcohol swabs

Plan your supplies

Pick how many weeks you will run it and how many shots you take each week. The list below shows everything you need.

12weeks
Shots per week

Storage and warning signs

Powder vials

Store at −20 °C (−4 °F) in dry, dark conditions and keep them in the original packaging.

Mixed vials

Keep them refrigerated and away from light. How long a mixed vial lasts depends on the product, so check its stability data.

Stop using a vial if

  • The liquid turns cloudy.
  • You can see particles.
  • The seal is damaged.
  • You do not know its storage history.

Product info and what TB-500 is

TB-500 is the name people use for thymosin beta-4, a protein made of 43 amino acids. Your body makes it naturally, and it is found in almost every cell. It helps cells move into a damaged area and start repairs.

TB-500 is one of the most popular recovery peptides. Most people use it for injuries, sore joints, and stiffness, and it is almost always paired with BPC-157.

Type
Peptide, 43 amino acids (thymosin beta-4)
Common research vial
10 mg
Common water amount
1 mL, which makes 10 mg per mL
Amounts people report
2 to 5 mg per shot
How often
Twice a week

What people use TB-500 for

Tendons and ligaments

People use it with BPC-157 for problems like a sore Achilles, tennis elbow, or a strained ligament.

Muscle injuries

People use it to help a pulled or torn muscle recover after training or a sports injury.

Stiff, sore joints

People with stiff shoulders, knees, or backs use it to move more freely.

Recovery from hard training

Athletes and lifters use it during heavy training blocks to bounce back between sessions.

Skin and wounds

Thymosin beta-4 is studied for wound healing, and people use it after cuts, scrapes, and surgery.

How fast people notice it

Most people report less stiffness within two to four weeks. Bigger injuries usually take most of the 12-week cycle.

What the research shows on TB-500

Pick a topic to see what has been studied.

Wound healing

A 1999 rat study in the Journal of Investigative Dermatology found that thymosin beta-4 sped up wound healing. Treated wounds had 42% more new skin by day 4 and 61% more by day 7.

Where to buy TB-500

Laboratory research supplier

BioEdge Research Labs

Quality varies a lot between sellers. I have been around research peptides for 10 years, and BioEdge is the supplier I send my readers to. Here is why.

The Peptide Report has a business relationship with BioEdge Research Labs. BioEdge sells this product for laboratory research only. BioEdge shipping policy

Stacks to consider with TB-500

These are the stacks people use most with TB-500, and what each one adds.

StackIngredientsWhy people stack them
TB-500 + BPC-1572 vialsTB-500 at 5 mg twice a week. BPC-157 at 400 mcg dailyInjury and tissue recoveryBPC-157 works mostly at the injury and in the gut. TB-500 works throughout the whole body and helps with flexibility and inflammation. This is the pairing people use most for tendon, ligament, and muscle injuries, usually for 12 weeks, once or twice a year. See the BPC-157 dosage guide.
TB-500 + CJC-1295 / Ipamorelin2 vialsTB-500 at 5 mg twice a week. CJC-1295 / Ipamorelin at 250 mcg each, 5 days on and 2 days offRecovery plus deeper sleepCJC-1295 (no DAC) and Ipamorelin raise growth hormone and deepen sleep. Your body does most of its repair during deep sleep, so people add this pair to a recovery cycle.
GLOW blendOne vialGLOW blend at BPC-157, TB-500, and GHK-Cu in one vialSkin, hair, and tissue (GLOW)GLOW puts BPC-157, TB-500, and the copper peptide GHK-Cu in one vial. People use it when they want skin and collagen support on top of recovery. See the GLOW dosage guide.
KLOW blendOne vialKLOW blend at BPC-157, TB-500, GHK-Cu, and KPV in one vialGut and inflammation (KLOW)KLOW adds KPV to the GLOW blend. People use KPV to calm inflammation, especially in the gut. See the KLOW dosage guide.
Want to learn to do the math yourself? Open the practice tools ▾

Learn to work out any vial

Pick a tool and try it. Each one uses the numbers from your calculator.

Now try one yourself

Use the same four steps. Once you can solve these, you can work out the units for any vial you ever pick up.

Your score: 0 correct.

units

Learn to read the syringe

Each line on the syringe is a unit of liquid. A unit measures volume, so the amount of peptide in it depends on your mix.

Tap the syringe or move the slider. The numbers use the vial you entered above. Read the line at the top edge of the plunger.

10units
0.10mL
mcg in your mix

See what water changes

More water makes the mix weaker, so the same amount takes up more units. The amount of peptide in the vial stays the same.

A draw under 5 units is harder to read accurately. Tap a row to use that water amount.

TB-500 questions and answers

What is the typical TB-500 dosage?

Most people use 5 mg twice a week. Some start lower, at 2 to 2.5 mg twice a week.

How many units is 2 mg or 5 mg of TB-500?

With a 10 mg vial and 1 mL of water, 2 mg is 20 units and 5 mg is 50 units. Use the calculator if your mix is different.

How much water goes in a 10 mg vial of TB-500?

Many people use 1 mL, which makes 10 mg per mL. That keeps a 5 mg dose at 50 units, so it fits in one insulin syringe.

How long do people run TB-500?

Most people run it for 12 weeks with BPC-157, once or twice a year as needed.

Do I need to inject TB-500 near the injury?

No. TB-500 travels through the whole body, so most people inject it under the skin of the belly.

What is the difference between TB-500 and BPC-157?

They are separate peptides. BPC-157 has 15 amino acids and works mostly near the injury and in the gut. TB-500 has 43 amino acids and works throughout the body, which is why people often run the two together.

Is TB-500 FDA approved?

No. It is sold as a research peptide.

Why don't my units match another chart?

Most charts assume one vial size and one water amount. If your mix is different, every unit number changes, so run your own numbers.

This guide is for educational purposes only and is not medical advice. For research use only. Not for human or animal use. Reported amounts come from online sources and are not clinically validated. Consult a qualified healthcare professional for medical decisions.

Instant e-Book Download

Get Your Free Copy of The Ultimate Peptide Blueprint
Exact stacks, dosages & cutting-edge protocols to cut fat, build muscle, and keep results-no fluff.