The Peptide Report dosage guide

CJC-1295 / Ipamorelin Dosage Guide and Calculator

CJC-1295 / Ipamorelin research vial
Example vial shown

CJC-1295 / Ipamorelin dosage chart and reported amounts

Most people use 250 mcg of CJC-1295 (no DAC) and 250 mcg of Ipamorelin together, 5 days on and 2 days off. With a 5 mg/5 mg blend vial mixed with 2 mL of water, that is 10 units on a U-100 syringe. Most people run it for 12 weeks, then switch to Tesamorelin.

The amounts in this chart come from online communities. The vial label shows the total peptide in milligrams (mg). The Amount column shows a portion of that total in micrograms (mcg). The syringe mark shows how much liquid corresponds to that amount.

Syringe marks below are based on a 5 mg vial with 2 mL of water added. Change vial size or water in the calculator

ReportedAmountVolumeSyringe mark (U-100)Draws per vial
5 mg
mg
mL
Draw to this line
units on a U-100 syringe

Show me the math
1

Convert your vial to mcg, because 1 mg is the same as 1,000 mcg.

2

Divide by your water to see how much is in 1 mL.

3

Find what one unit holds. A U-100 syringe has 100 units in 1 mL.

4

Divide your amount by what one unit holds.

How people take CJC-1295 / Ipamorelin

Reading a blend vial

The blend vial holds the same amount of each peptide, such as 5 mg of CJC-1295 and 5 mg of Ipamorelin. Enter one of those numbers as the vial size. Each draw then gives you the same amount of both.

When to take it

Most people take it at night before bed, at least two hours after eating. It also works in the morning on an empty stomach.

How often

Most people use it 5 days on and 2 days off, such as Monday through Friday. The days off help keep your body responding.

How long

Most people run it for 12 weeks. Many then rotate to Tesamorelin for 12 weeks, with 4 weeks off between cycles.

How to mix a CJC-1295 / Ipamorelin vial

Follow one step at a time. The steps use the water amount from your calculator.

  1. Step 1: Check the label

    Find the mg printed on your vial and enter it in the calculator. Let a frozen vial reach room temperature first.

  2. Step 2: Wipe both stoppers

    Clean the top of the peptide vial and the water vial with an alcohol swab. Let them dry.

  3. Step 3: Measure 2 mL

    Draw bacteriostatic water with a sterile syringe.

  4. Step 4: Add it slowly

    Let the water run down the inside wall of the vial. This helps prevent foaming.

  5. Step 5: Swirl gently

    Roll the vial until the powder fully dissolves. Do not shake it hard.

  6. Step 6: Label and chill

    Write today's date on the vial and refrigerate it at 2–8 °C (35.6–46.4 °F), away from light.

What you need

A vial of powder, a vial of water, a 3 mL syringe, an insulin syringe, and alcohol swabs
  • Peptide vial
  • Bacteriostatic water
  • 3 mL syringe for adding water
  • U-100 insulin syringe for measuring
  • Alcohol swabs

Plan your supplies

Pick how many weeks you will run it and how many shots you take each week. The list below shows everything you need.

12weeks
Shots per week

Storage and warning signs

Powder vials

Store at −20 °C (−4 °F) in dry, dark conditions and keep them in the original packaging.

Mixed vials

Keep them refrigerated and away from light. How long a mixed vial lasts depends on the product, so check its stability data.

Stop using a vial if

  • The liquid turns cloudy.
  • You can see particles.
  • The seal is damaged.
  • You do not know its storage history.

Product info and what CJC-1295 / Ipamorelin is

CJC-1295 and Ipamorelin are two peptides that tell your body to release more of its own growth hormone. They work through two different switches in the pituitary gland, so together they give a bigger release than either one alone.

This is the most popular growth hormone peptide pair. People use it for deeper sleep, recovery, and body composition. The version people use is CJC-1295 without DAC, which gives a short pulse that matches how your body releases growth hormone on its own.

Type
Two peptides: a GHRH analog and a ghrelin mimic
Common research vial
5 mg/5 mg or 10 mg/10 mg blend
Common water amount
2 mL, which makes 2.5 mg of each per mL in a 5 mg/5 mg vial
Amounts people report
100 to 300 mcg of each
Schedule
5 days on and 2 days off, usually at night

What people use CJC-1295 / Ipamorelin for

Deeper sleep

This is the effect people notice first. Growth hormone peptides deepen sleep, so people wake up feeling more rested.

Recovery

People use it to bounce back faster from training and to support injury recovery alongside BPC-157 and TB-500.

Body composition

People use it to support fat loss and lean muscle over a 12-week cycle.

Skin, hair, and nails

Growth hormone and IGF-1 play a part in collagen, and people report better skin and stronger nails.

Healthy aging

Growth hormone drops as you get older, and people use this pair to bring levels back toward where they were.

How fast people notice it

Most people notice deeper sleep within the first week or two. Changes in recovery and body composition take longer, usually two to three months.

What the research shows on CJC-1295 / Ipamorelin

Pick a topic to see what has been studied.

Ipamorelin

Ipamorelin was first described in a 1998 study in the European Journal of Endocrinology. It raised growth hormone in animals without raising cortisol or prolactin, which made it the first GH releaser that worked that cleanly.

Where to buy CJC-1295 / Ipamorelin

Laboratory research supplier

BioEdge Research Labs

BioEdge lists this as a blend vial, either 5 mg of CJC-1295 (no DAC) with 5 mg of Ipamorelin or 10 mg of each, as freeze-dried powder for laboratory research only. Its batch test report lists results for identity and purity.

The Peptide Report has a business relationship with BioEdge Research Labs. BioEdge sells this product for laboratory research only. BioEdge shipping policy

Stacks to consider with CJC-1295 / Ipamorelin

These are the stacks people run with CJC-1295 and Ipamorelin, and what each one adds.

StackIngredientsWhy people stack them
CJC-1295 / Ipamorelin + TesamorelinTwo vials, run in turnCJC-1295 (no DAC) and Ipamorelin in one vial. Tesamorelin in the second.Growth hormone rotationTesamorelin is the stronger growth hormone releaser and has the most human research behind it. People run CJC-1295 and Ipamorelin for 12 weeks, take 4 weeks off, then run Tesamorelin. Rotating is meant to keep the body responding. See the Tesamorelin dosage guide.
CJC-1295 / Ipamorelin + BPC-157Two vialsCJC-1295 (no DAC) and Ipamorelin in one vial. BPC-157 in the second.Recovery and deeper sleepThe body does most of its repair during deep sleep, and growth hormone peptides deepen that sleep. The reason people add BPC-157 is that they are working through an injury at the same time. See the BPC-157 dosage guide.
CJC-1295 / Ipamorelin + BPC-157 + TB-500Three vialsCJC-1295 (no DAC) and Ipamorelin in one vial. BPC-157 and TB-500 in the others.Full recovery stackAdding TB-500 brings whole-body tissue support to the stack. This is the setup people use for bigger injuries or heavy training blocks, usually for 12 weeks. See the TB-500 dosage guide.
Want to learn to do the math yourself? Open the practice tools ▾

Learn to work out any vial

Pick a tool and try it. Each one uses the numbers from your calculator.

Now try one yourself

Use the same four steps. Once you can solve these, you can work out the units for any vial you ever pick up.

Your score: 0 correct.

units

Learn to read the syringe

Each line on the syringe is a unit of liquid. A unit measures volume, so the amount of peptide in it depends on your mix.

Tap the syringe or move the slider. The numbers use the vial you entered above. Read the line at the top edge of the plunger.

10units
0.10mL
mcg in your mix

See what water changes

More water makes the mix weaker, so the same amount takes up more units. The amount of peptide in the vial stays the same.

A draw under 5 units is harder to read accurately. Tap a row to use that water amount.

CJC-1295 / Ipamorelin questions and answers

What is the typical CJC-1295 and Ipamorelin dosage?

Most people use 250 mcg of each, 5 days on and 2 days off. Some start at 100 mcg of each for the first week.

How many units is 250 mcg from a 5 mg/5 mg vial?

With 2 mL of water, 250 mcg of each is 10 units on a U-100 syringe. With a 10 mg/10 mg vial and 2 mL of water, it is 5 units.

Should I take CJC-1295 and Ipamorelin at night or in the morning?

Night is the most common time, because your body releases most of its growth hormone during deep sleep. It also works in the morning when you take it on an empty stomach.

Will CJC-1295 and Ipamorelin make me sleepy?

Not usually. Growth hormone peptides deepen your sleep once you are asleep. They do not knock you out.

Should I use CJC-1295 with DAC or without DAC?

Without DAC. It gives a short growth hormone pulse like your body makes on its own. The DAC version keeps growth hormone raised for days, which is not how your body normally works.

How long do people run CJC-1295 and Ipamorelin?

Most people run it for 12 weeks. Many rotate to Tesamorelin for the next 12 weeks, with 4 weeks off between cycles.

Do I need to avoid food before a shot?

Most people wait at least two hours after eating. Carbs and fat can blunt the growth hormone pulse.

Why don't my units match another chart?

Most charts assume one vial size and one water amount. If your mix is different, every unit number changes, so run your own numbers.

This guide is for educational purposes only and is not medical advice. For research use only. Not for human or animal use. Reported amounts come from online sources and are not clinically validated. Consult a qualified healthcare professional for medical decisions.

Instant e-Book Download

Get Your Free Copy of The Ultimate Peptide Blueprint
Exact stacks, dosages & cutting-edge protocols to cut fat, build muscle, and keep results-no fluff.